Cupra Tavascan EV Cable

Your Cupra Tavascan supports a maximum of 11kW charging (Three Phase/16A) and uses a Type 2 Connector.

Cupra Tavascan is an all-electric coupé SUV with a 100% electric powertrain. It has 2 motors in each axle making it a 4-wheel drive car. It has a range of around 280 miles on a single charge and can go from 0-62mph in 6.7 seconds.

Charging is done using an EV Cables Type 2 connector with a maximum power of 11kW. A fully depleted battery will charge in around 5 hours, but you will need a phase 3 grid connection to achieve this.

The exterior lines are designed for performance, the air vents allow for battery cooling and ease the airflow, a rear light that spans the width of the car and the 22” alloy wheels top off the stunning design of the Cupra Tavascan.

Inside the vehicle you can enjoy the ambient lighting, there’s a 12.3” digital cockpit giving you all the information you need, a 13” screen can be used by the passenger to pick the entertainment, leather bucket seats and integrated speakers.

Go up to 280 miles on a single charge
0-62mph in 6.7 seconds

Choose from the cables listed below.
YEARS: ALL

Important Note About 11kW Cables: 11kW cables (3 Phase, 16A) are not usually ideal as a general charging cable in the UK. This is due to the fact that most EVSE (Charge points) in the UK are single-phase only. This would cause your 11kW cable to charge at 1 phase, 16A which is a 3.6kW charge rate, the slowest you can get! Most users would benefit more from a 7.2kW charging cable or the heavier 22kW charging cable.

Our EV charging cables are backward compatible. They will automatically switch between 32 and 16 amps. So you can purchase more amps and phases for use on others cars/future-proofing and it’ll still work on your current car. Any cable lower than your cars maximum supported charging, will limit the change rate to the cable capacity.

Don't forget, your charge rate is also limited by your charge point. 

Car Side Plug/Connector

Type 2