Kia EV6 Charging Cables
Kia EV6 EV Cable
Your Kia EV6 supports a maximum of 11kW charging (Three Phase/16A) and uses a Type 2 Connector.
Charging is done using an EV Cables Type 2 connector with a maximum power of 11kW. A fully depleted battery will charge in around 7 hours for the 77.4kWh battery and 6 hours for the 58kWh battery, but you will need a phase 3 grid connection to achieve this.
For the rear-wheel drive version, Kia says the EV6 has 230hp from a single e-motor, capable of sprinting from 0-62mph in 6.2 seconds, with the all-wheel drive version producing 325hp and a 0-62mph time of 5.2 seconds.
The EV6 has a vehicle-to-load (V2L) system. In simple terms that means the car can power household items, such as a kettle or microwave, or even charge another EV, from its charge port using an EVCables V2L cable.
Choose from the cables listed below.
YEARS: ALL
3.6kW Cable |
7.4kW Cable |
11kW Cable |
22kW Cable |
Single Phase 16a |
Single Phase 32a |
Three Phase 16a |
Three Phase 32a |
✓ |
✓ |
✓ Max supported charge rate |
X Will work but your car is limited to 11kW |
Our EV charging cables are backward compatible. They will automatically switch between 32 and 16 amps. So you can purchase more amps and phases for use on others cars/future-proofing and it’ll still work on your current car. Any cable lower than your cars maximum supported charging, will limit the change rate to the cable capacity.
Don't forget, your charge rate is also limited by your charge point.
Car Side Plug/Connector |
Type 2 |
Filtry
8 produktów