Peugeot e-Rifter Standard 50 kWh Charging Cables
Your US Spec Peugeot e-Rifter Standard 50 kWh uses a J1772 or NACS Plug and has a Maximum AC Charge Rate of 7.4kW (Single Phase 32 amp).
The right cable depends on how you're going to use it.
After thousands of conversations with EV owners, we know you'll be using your cable in one for the ways below. We recommend Peugeot e-Rifter Standard 50 kWh charging cables below for your car, depending on how you plan to use it.
Any questions? Live chat with us in the bottom right!
Portable Chargers for the e-Rifter Standard 50 kWh
Home / Industrial Sockets to Car
Choose based on how you plan to use your portable charger.
1. For Home Sockets (US)
This selection will enable you to charge your e-Rifter Standard 50 kWh from a home socket.
Tethered EV Cables for the e-Rifter Standard 50 kWh
For EV Chargers to Car (Tethered)
Choose based on how you plan to use your cable.
1. Tethered J1772 Charge Point. Single Phase Supply.
Untethered EV Cables for the e-Rifter Standard 50 kWh
EV Chargers to Car (Pluggable)
Choose based on how you plan to use your cable.
1. For Home & Public EV Chargers.
This selection will allow you to charge your e-Rifter Standard 50 kWh at all possible speeds up to it's maximum 7.4kW.
Note: We don't recommend 11kW cables for most users so if your cars maximum charge rate is 11kW we'll instead recommend 22kW. This is because a 22kW cable will enable you to charge on 22, 11, 7 & 3kW chargers, where as a 11kW cable will just charge at 11 or 3KW.